| Dimensions |
20.125 X 21.3125 X 35 Inch, 13.75 X 13.75 Inch Platform | 17.3125 X 20.125 X 30.9375 Inch, 13.75 X 13.75 Inch Platform | 12-1/2 X 14-1/2 X 16 Inch Exterior, 10-1/2 X 11-1/2 X 11-1/2 Inch Interior, 1/2 X 8 X 8-1/2 Inch Tray | 20.125 X 21.3125 X 35 Inch, 13.75 X 13.75 Inch Platform | 17.3125 X 20.125 X 30.9375 Inch, 13.75 X 13.75 Inch Platform |
| Features and Benefits |
- 10 to 500 rpm Speed
- ±1% rpm Speed accuracy
- 30.9 Maximum load
- ±0.1°C Temperature accuracy
- 0.5°C Temperature uniformity
- 1 min to 999 hours 59 mins Timer
- Stainless steel material
- Microprocessor controlled, LCD display, imbalance sensor, Rs-232 interface, USB port
- Used with platforms, flask clamps, test tube racks, microplate holders, rubber mats
- Continuous operating mode
- Orbital movement type
|
- 10 to 500 rpm Speed
- ±1% rpm Speed accuracy
- 30.9 Maximum load
- ±0.1°C Temperature accuracy
- 0.5°C Temperature uniformity
- 1 min to 999 hours 59 mins Timer
- Stainless steel material
- Microprocessor controlled, LCD display, imbalance sensor, Rs-232 interface, USB port
- Used with platforms, flask clamps, test tube racks, microplate holders, rubber mats
- Continuous operating mode
- Orbital movement type
|
- ±0.1°C at 65°C Chamber stability
- 8 to 25 Strokes/min rocking speed
- 5.5 to 11° Tilt angle
- LED Display
- Gentle rocking motion is perfect for washes and hybridization
- Small footprint saves bench space
- Three removable shelves, each capable of holding blots up to 20 X 20 cm
- Gasket sealed see through door
- PID controller for easy temperature selection and stability
- Adjustable rocking speed from 8 to 25 strokes per minute
- Supplied with two removable shelves
- Used for hybridization and wash procedures for scientists that prefer to use heat sealed bags, plate or dishes/trays; conventional incubations with or without rocking motion; cell culture in bags
- 2 Years warranty
|
- 10 to 500 rpm Speed
- ±1% rpm Speed accuracy
- 30.9 Maximum load
- ±0.1°C Temperature accuracy
- 0.5°C Temperature uniformity
- 1 min to 999 hours 59 mins Timer
- Stainless steel material
- Microprocessor controlled, LCD display, imbalance sensor, Rs-232 interface, USB port
- Used with platforms, flask clamps, test tube racks, microplate holders, rubber mats
- Continuous operating mode
- Orbital movement type
|
- 10 to 500 rpm Speed
- ±1% rpm Speed accuracy
- 30.9 Maximum load
- ±0.1°C Temperature accuracy
- 0.5°C Temperature uniformity
- 1 min to 999 hours 59 mins Timer
- Stainless steel material
- Microprocessor controlled, LCD display, imbalance sensor, Rs-232 interface, USB port
- Used with platforms, flask clamps, test tube racks, microplate holders, rubber mats
- Continuous operating mode
- Orbital movement type
|
